If you need to buy Welding positioner, then the first choice should be on its requirements, because only carefully selected is the most appropriate, and when selecting welding positioner, we should mainly consider the timeliness and economy:

First, the weight of welding positioner, the center of gravity and eccentricity of welding parts on the whole working table should be guaranteed within the corresponding data range, but also to ensure a certain capacity.

2. If the selected welding positioner is for circumferential seam welding, the rotation speed should be considered according to the groove of the weldment. The speed should be guaranteed within the range of speed regulation of the positioner, and the stable requirement of the working platform in operation. Can it satisfy the processing of the whole process?

3. If the size of the whole weldment on the outer contour of the welding positioner is relatively large, then it is necessary to consider the inclination of the worktable, or whether the inclined angle can satisfy the best welding position of the weldment, etc. When the inclined angle contacts with the weldment, the clearance from the ground is larger when selecting the worktable, so as to ensure the safety of the worktable. Certify the whole welding process requirements.

4. When it is necessary to start the welding positioner, install the electromagnetic fixture and water cooling equipment, it should be adjusted by the manufacturer first.

5. For welding positioner, welding parts with high current are needed.